MV95 Mini V-Mount Battery: Charging and D-Tap Cable FAQ
By Westcott | Published: 2026-11-03
Category: Productrecensies
Straight answers on charging the MV95 Mini V-Mount battery, using its D-Tap cable, USB-C output, and powering LED lights on set.
Quick answer
The MV95 Mini V-Mount battery is a 95Wh, 14.8V, 6400mAh pack that supports up to a 10A draw, so it can run LED lights and cameras while also charging smaller devices over its 60W USB-C and USB-A ports. The included charger and L120-B D-Tap cable cover the two main jobs: refilling the pack and feeding D-Tap gear.
What the MV95 is actually built to power
The 95Wh capacity and 10A draw ceiling make the MV95 a practical block for LED lights, monitors, and cameras that expect a V-mount plate. The same pack also has 60W USB-C and USB-A outputs for laptops, phones, and other small devices, which is useful when you want one battery to cover both the light stand and the charging table.
When a mini V-mount makes more sense than a full-size block
A mini V-mount saves space and weight on smaller rigs, gimbals, and travel kits. The trade-off is that 95Wh sits at the lower end of V-mount capacity, so long, high-draw shoots may need a second pack rather than relying on one battery for the whole day. Check your light's wattage before assuming a single MV95 will cover a full shooting schedule.
What the touch display tells you and what it does not
The MV95 uses a touch-activated display to show the battery's status. Treat it as a quick check before you mount the pack, not a substitute for a proper test on a new light. If a specific runtime figure is not listed in the product details, plan a short test run with your own gear instead of guessing from capacity alone.
MV95 charging and D-Tap questions, answered
- How do I charge the MV95 battery?
- Use the charger supplied with the MV95 kit. Connect it to the battery's charging input and let the pack charge before the shoot; check the touch display to confirm it is taking a charge. Charge the night before and confirm the display shows progress before you pack it.
- Can I charge the MV95 over USB-C?
- The MV95's 60W USB-C port is listed as a power output for other devices, not as a charging input for the battery itself. Use the included charger to refill the pack. Do not assume a USB-C laptop charger will refill the MV95; keep the dedicated charger in the kit.
- What is the L120-B D-Tap cable for?
- The L120-B D-Tap cable connects the MV95's D-Tap port to D-Tap-powered gear such as lights and accessories. Match the cable end to your device's D-Tap input before powering up. Label the D-Tap cable so it does not get swapped with other power leads in the case.
- Can the MV95 run LED lights?
- Yes, within its 10A draw limit. Add up the wattage of the lights you plan to run and stay under that ceiling; for multi-light setups, split the load across packs. Check the light's rated draw against the 10A limit before committing to a single battery.
- How many devices can I power at once?
- The MV95 can power multiple devices simultaneously through its D-Tap, 60W USB-C, and USB-A ports. Keep an eye on total draw when you combine a light with a laptop or phone charge. Total draw matters more than the number of ports in use.
- Is the MV95 a good travel battery?
- Its mini V-mount size and 95Wh capacity suit travel kits and small rigs. Confirm your airline's lithium battery rules before flying, since 95Wh sits close to common carry-on limits. Check carry-on rules for your airline before packing the MV95 for a flight.
MV95 at a glance
- MV95 Mini V-Mount Battery, Charger and L120-B D-Tap Cable: 95Wh, 14.8V, 6400mAh mini V-mount pack with up to a 10A draw, plus D-Tap, 60W USB-C, and USB-A ports. One battery can feed a V-mount light or camera and still top up a phone or laptop over USB-C.
MV95 Mini V-Mount Battery, Charger and L120-B D-Tap Cable
