How to Install Bumper Guards on Your FJ-T1 Trigger
By Westcott | Published: 2026-10-27
Category: How-to Guides
Learn how to fit silicone bumper guards on your FJ-T1 wireless trigger for drop and scratch protection. Step-by-step guide with common mistakes to avoid.
Quick answer
Installing bumper guards on your FJ-T1 wireless trigger takes less than a minute. The form-fitting silicone guards slide over the trigger body and preserve full access to buttons, screen, ports, and hot shoe mount.
Why use bumper guards on your FJ-T1 trigger
A wireless trigger is one of the most handled pieces of gear on a shoot. Dropping it onto concrete or packing it loose in a bag can scratch the body or damage the screen. Silicone bumper guards add a thin layer of shock absorption without making the trigger bulky.
The guards are custom-molded for the FJ-T1, so they fit snugly around the contours and leave every control — buttons, touchscreen, ports, and hot shoe — fully accessible. They also add grip, which helps prevent accidental slips.
What you need before you start
You only need the bumper guard itself and a clean FJ-T1 trigger. The guards come in a two-pack, so you can protect a second trigger or keep a spare. Choose a color that matches your gear or makes the trigger easier to spot in a bag.
Step-by-step installation guide
- Step 1: Clean the trigger body: Wipe down the FJ-T1 with a dry microfiber cloth to remove dust, oil, or debris. A clean surface helps the guard grip evenly. Skipping this step can leave grit trapped under the guard, which may scratch the trigger over time.
- Step 2: Orient the guard correctly: Hold the bumper guard so the cutouts for the hot shoe and screen face the same direction as the trigger's top and front. The guard is asymmetrical — it only fits one way. Forcing the guard on backward will block the hot shoe mount and make the screen cutout misalign.
- Step 3: Slide the guard over the bottom edge: Start at the bottom of the trigger (opposite the hot shoe). Gently stretch the silicone over the lower corners and work it upward. Use your thumbs to press the guard into place around the sides. Pulling too hard on a thin edge can tear the silicone. Work slowly and evenly.
- Step 4: Align the openings: Once the guard is fully seated, check that the screen, all buttons, the USB port, and the hot shoe are fully uncovered. Adjust by pinching and sliding the guard slightly until every opening lines up. A misaligned opening can block a button or prevent the trigger from seating in a hot shoe. Double-check before use.
- Step 5: Test all functions: Press every button, tap the touchscreen, plug in a sync cable, and mount the trigger on a camera or light stand. The guard should not interfere with any function. If a control feels stiff, the guard may be twisted. Remove and reinstall it rather than trimming the silicone.
Product details
- Bumper Guards for FJ-T1 Wireless Trigger: Custom Fit: Form-fitting silicone guards made exclusively for the FJ-T1 Wireless Flash Trigger You don't have to worry about blocking buttons or ports — the guard is shaped exactly for your trigger.
Bumper Guards for FJ-T1 Wireless Trigger - Bumper Guards for FJ-T1 Wireless Trigger: Everyday Protection: Shields your trigger from drops, scratches, and wear while shooting or traveling A simple silicone layer can save you from costly repairs or replacements after an accidental drop.
- Bumper Guards for FJ-T1 Wireless Trigger: Lightweight & Flexible: Slim design installs easily and provides protection without bulk The guard adds negligible weight, so your trigger still fits comfortably in your hand or a pocket.
