Back to Blog
Tips & Care 2026-11-16 Westcott 0 views

Creative Color Gel Pack for Optical Spot: 10 Colors in Use

Creative Color Gel Pack for Optical Spot: 10 Colors in Use

A practical walkthrough for the 10-pack of creative color gels made for the Westcott Optical Spot by Lindsay Adler, from reading the color set to swapping gels mid-shoot.

One pack, ten decisions

The Creative Color Gel Pack for Optical Spot by Lindsay Adler is a set of ten circular color filters cut to fit the gel holder that ships with the Optical Spot. That sizing is the whole point: instead of cutting gel sheets down to size before every shoot, you open the pack, pick a color, and drop it into the holder.

What makes the pack worth planning around is the range. It is not ten variations of the same hue. It moves from saturated statement colors to warm and soft tones, which means one pack can cover a bold background wash on one setup and a gentler accent on the next. The rest of this guide walks through how to read the set, place a gel, and change colors without breaking your flow.

What the pack actually contains

Reading the ten colors as three working groups

The names in the pack fall into loose families. Grouping them this way helps you reach for the right gel quickly when the light is already set.

  • Cool and saturated: Magenta, Daylight Blue, Teal, Violet, Blue Green, and Light Purple. These read as strong color statements, useful when the gel is meant to be visible as color rather than a subtle tint.
  • Warm and soft: Straw, Light Flame, and Lavender. These sit closer to a gentle wash, which suits setups where you want the color to support the subject rather than dominate it.
  • Green-leaning: Moss Green stands somewhat apart from the blues and violets, giving you a distinctly different hue to work with when you want separation from the rest of the set.

Placing a gel in the Optical Spot holder

The supplied product information confirms the filters are sized for the gel holder included with the Optical Spot, but it does not document a step-by-step mounting procedure. Treat the sequence below as a sensible working routine, and follow Westcott's own instructions for the Optical Spot where they apply.

  1. Power down and let the fixture settle: Make gel changes with the light off so you are not reaching into a hot spot while positioning a filter.
  2. Locate the gel holder on the Optical Spot: The holder is the part the 2.5” (6.4cm) circular filters are sized to fit. Confirm you are working with that holder before you start.
  3. Seat the filter flat in the holder: Because the gels are pre-cut circles, they should sit flush rather than buckle. A filter that is not seated flat can catch light unevenly.
  4. Check the look before you commit: Fire a test frame with the gel in place. The pack is built around the idea that one gel can produce different looks depending on lighting technique, so judge the result on camera, not by eye alone.

Getting more than one look from a single gel

The product description notes that you can create multiple looks with one gel by using different lighting techniques. That is the most useful idea in the pack: the gel is a fixed color, but the result is not fixed. Changing how the gelled light relates to your subject, or how much of the frame it reaches, changes what the color does.

In practice, that means auditioning a color rather than assigning it. Pull a gel like Teal or Magenta, shoot a frame, adjust the setup, and shoot again before deciding it is the wrong color. The ten-color range exists so you can compare, not so you can commit to the first filter you try.

Swapping colors mid-shoot without losing time

A ten-gel pack invites experimentation, and experimentation goes faster with a simple routine.

  • Pull the gels you plan to try first: Set aside two or three colors from the pack before the session starts. Sorting through all ten while a subject waits is the slow part.
  • Keep the filters clean and flat: Store the gels so the circles stay unbent. A flat filter seats more predictably in the holder than one that has been folded in a bag.
  • Change one variable at a time: Swap the gel, keep the light position the same, and shoot. Then change the lighting technique with the same gel. That separates the effect of color from the effect of placement.

What the pack does not tell you

The supplied information covers the filters, their colors, and their fit with the Optical Spot gel holder. It does not include care instructions, cleaning guidance, or a documented installation procedure for the holder. If you need those details, check Westcott's documentation for the Optical Spot rather than assuming a method.

It is also worth being clear about compatibility. These are 2.5” (6.4cm) circular filters sized for the gel holder included with the Optical Spot by Lindsay Adler. The supplied information does not confirm that they fit other modifiers or other gel holders, so treat the Optical Spot holder as the supported use case.

The pack at a glance

Related Articles

Customer Service
Home
Products
Cart
Profile